
Gutter Repair
Gutter Repair in Philadelphia
Leaks, sagging runs, separated joints and damaged downspouts put back in working order.
FIX THE LEAKBEFORE ITCOSTS MORE.
Most gutter problems start small. A joint opens up, a hanger loosens, a downspout gets knocked out of line — and water starts going somewhere it was never meant to go. Caught early, that is a repair rather than a replacement.
Got A Guy Seamless Gutters LLC repairs residential gutters and downspouts across Philadelphia and nearby areas. We look at why the failure happened, not just where the water is showing up, so the fix holds.
What gets repaired
- 01
Leaking seams and end caps
Open joints and failed sealant get cleaned, resealed or refitted so water stays in the trough.
- 02
Sagging and loose runs
Sections that have dropped between hangers are re-secured and re-pitched so water runs to the outlet again.
- 03
Separated corners and joints
Miters and joints that have pulled apart are refastened and sealed, or the section is replaced when it's past repair.
- 04
Damaged downspouts
Crushed, disconnected or badly placed downspouts are repaired, re-strapped or replaced.
Common problems we're called for
Older Philadelphia homes often have gutters that have been patched by more than one person over the years. Part of a repair visit is sorting out what is still solid and what has simply reached the end of its life.
- Water dripping from a joint or corner during every rain
- A gutter section hanging lower than the rest of the run
- Overflow at one specific spot along the roofline
- Downspouts pulled loose from the wall or crushed at the bottom
- Stains streaking down siding or brick below the gutter line
- Water pooling in the trough after the rain stops
How It Works
The process.
- 01
Find the actual cause
We inspect the run, the hangers, the pitch and the drainage path rather than only the spot that's dripping.
- 02
Give you the options
You'll hear plainly whether a repair is the right call or whether replacing the run is the better long-term move.
- 03
Make the repair
Joints resealed, hangers reset, pitch corrected, damaged pieces replaced with matching material.
- 04
Confirm the flow
Water is run through the repaired section to verify it drains to the downspout the way it should.
FAQ
Common questions
- Can leaking gutters be repaired?
- Often, yes. Leaks at joints, end caps and corners can frequently be cleaned and resealed. If the metal itself is rusted through or the section has been repaired repeatedly, replacing that run is usually the better option.
- Why are my gutters sagging?
- Usually loose or too-widely-spaced hangers, weight from standing water and debris, or fascia board that no longer holds a fastener well. All three get checked before the section is re-secured.
- How can I tell if I need repair or replacement?
- Isolated damage in an otherwise sound system points to repair. Widespread rust, multiple failing joints, or gutters too small for the roof point to replacement. We'll tell you which one we see.
- Do you repair storm damage?
- Yes. Storm-related gutter and downspout damage is a common call — see our storm damage gutter repair page for details.
- Do you fix the downspouts too?
- Yes. A gutter that drains into a damaged or poorly placed downspout is still a drainage problem, so both get looked at.
- What areas do you serve?
- Philadelphia and the surrounding areas. Call 215-856-3980 to confirm service to your address.
Related Services
You might also need

Free Estimates
Need gutter work?You've got a guy.
Installation, repairs, cleaning and gutter protection throughout Philadelphia and surrounding areas.
